Category: News

Industry News | Zarafshan, Navoiy Region, Uzbekistan | November 3, 2026

Material focus: 304L, 316L and duplex 2205 stainless steel for mining reagent tanks, filtration equipment, process-water piping, pump-valve machining stock and maintenance components.

Recent developments in Uzbekistan’s gold-mining industry highlight ongoing investment in ore processing, reagent-handling infrastructure, process-water management and locally manufactured industrial equipment.

For mining equipment manufacturers and maintenance suppliers serving the Zarafshan industrial supply chain, these activities provide a relevant context for reviewing stainless steel material requirements.

Grades 304L, 316L and duplex 2205 may be considered for selected corrosion-resistant components. However, their use must be approved according to the actual process chemistry, temperature, pressure and mechanical requirements.

This article reviews verified 2026 mining developments and explains how buyers can specify stainless steel raw materials for mining auxiliary equipment.

1. Zarafshan Mining Industry: 2026 Developments

On April 28, 2026, Navoi Mining and Metallurgical Company (NMMC) reported progress on a processing-capacity expansion project at Hydrometallurgical Plant No. 7.

The project aims to increase processing capacity by 10 million tonnes per year. The published scope includes work involving ore preparation, thickening, adsorption sections and expansion of reagent storage facilities.

NMMC also reported a process-water recirculation rate of 60% at the plant, highlighting the importance of water management in mineral-processing operations.

Official source: NMMC – Hydrometallurgical Plant No. 7 Expansion, April 28, 2026.

A separate NMMC announcement dated October 5, 2026, described construction of two conveyor lines at the Muruntau mine, with a combined length of 7.7 kilometres.

The company stated that equipment for the conveyor project was manufactured locally at the Navoi Machine-Building Plant and Zarafshan Repair and Mechanical Plant.

Official source: NMMC – Muruntau Conveyor Construction, October 5, 2026.

These are separate industrial developments. Neither announcement identifies an order for 304L, 316L or duplex 2205 stainless steel or establishes any supply relationship with JISCO JUDE.

2. Stainless Steel Components for Mining Auxiliary Equipment

Mineral-processing facilities may use stainless steel materials in selected reagent preparation, filtration, water handling and maintenance applications.

The correct material depends on the particular equipment component and service environment.

Equipment ComponentPotential Starting MaterialKey Purchasing Requirement
Reagent preparation tankApproved stainless sheet or plateReagent chemistry, grade, thickness and vessel design
Dosing tank or mixing vesselSpecified stainless steel plateOperating conditions, dimensions and weld requirements
Filter housing or coverApproved stainless plate or formed blankPressure duty, corrosion and drawing requirements
Process-water pipe sectionSpecified stainless steel pipeWater chemistry, pipe standard, OD or NPS, and wall thickness
Pump shaft or valve machining blankApproved stainless round bar or forging stockGrade, product standard, diameter and machining allowance
Maintenance plate or bracketDrawing-based stainless plateComponent drawing, dimensions and traceability

The table illustrates possible raw-material applications. It is not a confirmed equipment list or bill of materials for NMMC.

Not all mining tanks, filters, piping systems or pumps require stainless steel. Carbon steel, lined equipment, polymers and other corrosion-resistant alloys may be appropriate depending on the process.

3. Comparing 304L, 316L and Duplex 2205

GradeUNSCommon ENMain Selection Consideration
304LS304031.4307Low-carbon austenitic steel for compatible welded equipment
316LS316031.4404Molybdenum-bearing austenitic grade for selected corrosion environments
Duplex 2205S32205 or S31803, as specified1.4462Higher strength and improved resistance to certain chloride-related corrosion mechanisms

304L and 316L

304L may be suitable for selected welded tanks and equipment where its corrosion resistance meets the approved service requirements.

316L contains molybdenum and may offer improved resistance to certain forms of localized corrosion compared with 304L in suitable environments.

However, neither grade is automatically compatible with every mining reagent, acid, oxidizing agent or chloride-containing solution.

Duplex 2205

Duplex 2205 is an austenitic-ferritic stainless steel with higher strength than common annealed 304L and 316L grades and good resistance to certain forms of chloride-related stress corrosion cracking.

It may be considered for selected process-water piping, vessels and other components when the approved corrosion assessment and engineering design justify its use.

However, 2205 is not immune to chemical attack or localized corrosion. It must not be treated as a universal mining-reagent material.

2205 is also not a substitute for dedicated abrasion-resistant materials where severe particle wear governs equipment design.

UNS S32205 and S31803 have related but not identical specified composition requirements. The purchase order should identify the required UNS grade explicitly.

Technical background: Alleima – Duplex 2205 Material Data.

Important: The word “mining” does not define a single corrosive environment. Material selection must consider the actual reagent, pH, concentration, chloride level, temperature, solids content, operating pressure and maintenance conditions.

4. Selecting the Correct ASTM Material Standard

Different stainless steel product forms require different specifications, even when the same alloy grade is used.

Product FormRelevant ASTM StandardTypical Procurement Scope
Stainless plate and sheetASTM A240/A240MApproved tank, filter housing and cut-plate materials
304L or 316L process pipeASTM A312/A312MSpecified austenitic process piping
Duplex 2205 pipeASTM A790/A790MSpecified ferritic-austenitic process piping
Duplex 2205 tubingASTM A789/A789MSpecified duplex stainless tubing
Stainless round barASTM A276/A276M, where applicableMachining stock for selected shafts and non-forged components
Pressure-related forged partsApplicable forging specification, such as ASTM A182Design-approved valve and pressure components

ASTM A240/A240M-26 covers specified stainless steel flat products. ASTM A790/A790M-26 and A789/A789M-26 address ferritic-austenitic pipe and tubing respectively.

Stainless steel round bar may be ordered under ASTM A276/A276M-25 where the grade, condition and application are covered by the specification.

For pressure-retaining valve components, the correct material may instead be an approved forging product. Ordinary round bar certification must not automatically be substituted for a required forged pressure part.

The applicable product standard, grade, delivery condition and inspection requirements should be identified on each purchase order.

5. Corrosion, Fabrication and Quality Control

Reagent Compatibility

Some mineral-processing chemicals can create corrosion conditions that differ significantly from ordinary industrial water service.

A steel grade should not be approved from its nominal composition alone. Actual chemical compatibility, including possible concentration changes and cleaning exposure, must be assessed.

Process-Water Piping

For process-water piping, purchasers should evaluate chloride content, dissolved solids, temperature, pressure, flow velocity and any relevant contamination.

Where abrasive particles are present, erosion and wear may also be important. Increased corrosion resistance alone does not guarantee protection against solids-related erosion.

Welding Duplex 2205

Fabrication of duplex stainless steel requires suitable control of welding conditions and the resulting microstructure.

Welding procedures, filler material, heat input, interpass temperature and inspection must follow the applicable fabrication specification.

Improper processing may adversely affect corrosion resistance and mechanical performance.

Machining and Material Identification

Pump-valve machining stock should be specified by grade, product standard, diameter, delivery condition and final component requirements.

Where appropriate, the purchaser should require mill test certificates, heat traceability, dimensional inspection and supplementary testing.

JISCO JUDE provides published information on Stainless Steel Quality Control, Precision Cutting and CNC Machining Services.

Actual cutting and machining feasibility depends on the grade, dimensions, drawings, tolerance and available processing equipment.

6. Stainless Steel RFQ Checklist for Mining Equipment

For accurate international quotations, mining equipment OEMs and maintenance contractors should provide the following details:

  • Application: Reagent tank, filter housing, process-water pipe, pump-valve blank or replacement plate.
  • Material: Approved 304L, 316L, UNS S32205, UNS S31803 or another specified grade.
  • Standard: Full ASTM, EN or other product standard and edition.
  • Dimensions: Plate thickness and size, pipe OD/NPS and wall, or round-bar diameter and length.
  • Service conditions: Relevant reagent chemistry, concentration, temperature, pressure and solids exposure for engineering review.
  • Drawings: Approved PDF, DXF, DWG or other applicable technical documents.
  • Quality: MTC, heat identification, inspection and supplementary testing requirements.
  • Commercial: Quantity, delivery location, required schedule and shipping terms.

Material substitutions must be approved by the responsible engineering team before order confirmation.

7. Frequently Asked Questions

Is 316L suitable for all mining reagent tanks?

No. Suitability depends on the actual reagent composition, concentration, temperature, operating conditions and equipment design.

When should duplex 2205 be considered for process-water piping?

Duplex 2205 may be considered where its strength and corrosion characteristics provide a justified benefit, particularly in some chloride-containing environments. Detailed corrosion and design approval are still required.

Are S31803 and S32205 exactly the same material?

No. They are related duplex 2205 designations but do not have identical specified composition limits. Buyers should specify the exact UNS grade required.

Can ASTM A312 be used for duplex 2205 process pipe?

ASTM A312 primarily addresses specified austenitic stainless steel pipe. ASTM A790 is a relevant specification for duplex stainless steel process pipe.

Does 2205 stainless steel prevent abrasive slurry wear?

No. Corrosion resistance and abrasion resistance are different properties. Equipment handling abrasive slurries may require additional wear protection or alternative materials.

Can stainless steel round bar be used for pump and valve parts?

It may be appropriate for selected machined components. However, parts requiring forged pressure-material specifications must use approved products and cannot be replaced automatically with general-purpose bar stock.

Does JISCO JUDE guarantee all 2205 sizes are available?

No. Specific plate, pipe, bar and other product forms must be checked for grade availability, dimensions, delivery condition and required certification.

What should a buyer send for a mining equipment quotation?

Provide the approved material grade, complete product standard, dimensions, drawings, quantity, inspection requirements and delivery destination.

8. Request Stainless Steel from JISCO JUDE

304L, 316L and Duplex 2205 Stainless Steel for Mining Equipment Manufacturing

JISCO JUDE supplies stainless steel raw-material categories for industrial manufacturing, equipment maintenance and international procurement.

Buyers seeking materials for reagent tanks, filtration equipment, process-water piping and pump-valve component blanks can submit approved specifications for availability and quotation review.

Relevant products and services:

For an RFQ, please include:

  • Approved 304L, 316L or 2205 UNS grade.
  • Applicable product standard and edition.
  • Required plate, pipe or round-bar dimensions.
  • Drawings and processing requirements.
  • Quantity, MTC and inspection requirements.
  • Destination in Uzbekistan or another country.
  • Requested delivery schedule and Incoterms.

Request a quotation: Contact JISCO JUDE International Sales.

Email your BOM and drawings: support@jiscojude.com.

Specific grade availability, product standards, dimensions, cutting and machining capabilities, documentation, pricing and delivery arrangements require formal confirmation.

Raw-material supply does not establish JISCO JUDE as the manufacturer or certifier of completed mining processing equipment.

9. Official News and Technical References

  1. NMMC – Hydrometallurgical Plant No. 7 Expansion, April 28, 2026.
  2. NMMC – Muruntau Conveyor Project, October 5, 2026.
  3. ASTM A240/A240M-26 – Stainless Steel Plate, Sheet and Strip.
  4. ASTM A790/A790M-26 – Duplex Stainless Steel Pipe.
  5. ASTM A789/A789M-26 – Duplex Stainless Steel Tubing.
  6. ASTM A276/A276M-25 – Stainless Steel Bars and Shapes.
  7. Alleima – Duplex 2205 Material Properties and Product Standards.

Editorial notice: The NMMC project updates are documented industrial developments. They do not establish purchases of 304L, 316L or duplex 2205, identify approved alloy selections for the mentioned facilities, or imply any commercial relationship with JISCO JUDE.

Engineering notice: This article provides general stainless steel selection and procurement information. It is not a corrosion compatibility certificate, pressure-equipment approval, abrasion-life guarantee, mining-process design or finished-equipment certification. Final material and equipment acceptance must follow the approved engineering requirements.